A Closer Look at Brivo’s Integrated Power Solution

Earlier this year Brivo announced its partnership with LifeSaftey Power® and showed how installers specifying access control installations can take advantage of a unified enclosure coordinating system power, lock power and access panel hardware with the new Brivo Integrated Power Management System. Through our partnership with LifeSafety Power, Brivo brings to the installer community a complete electrical and mechanical integration of power, locks and Brivo ACS5000 controllers in a single wall mount chassis, providing faster, simpler installation and greater service efficiencies.

Integration benefits

Traditionally, access control integrators would need three separate cabinets for system power, lock power and access hardware, greatly increasing the wall space footprint and the job costs due to multiple AC drops and inter-cabinet wiring.

Brivo Integrated Supply, however, has a unique power distribution architecture that busses 12 and 24V DC across all the power distribution modules with individual voltage selection on a per output basis. With the LifeSafety Power partnership, integrators can realize up to 60% wall space savings and 40% installation savings.

Brivo Integrated Power Supply was originally introduced with single voltage units (LSP-SV75 and LSP-SV150), for 4-16 doors in two different chassis models, and have recently been expanded to include dual voltage and managed power units.

Brivo Single Voltage SKUs

LSP-SV75

75W Single Voltage Power System for Brivo boards

  • 12V/6A | 75 Watts for Brivo controllers
  • 24H x 20W x 4.5D enclosure accommodates up to three (3) ACS5000 series boards (Main, DB, IO)

         Note: ACS5000 panels and expansion boards sold separately. Back-up batteries not included.

LSP-SV150

150W Single Voltage Power System for Brivo boards and locks

  • 12V/12A | 150 Watts for Brivo controllers
  • 36H x 30H x 4.5D enclosure accommodates up to (10) ACS5000 series boards (Main, DB, IO)

Note: ACS5000 panels and expansion boards sold separately. Back-up batteries not included.

Brivo Dual Voltage SKUs

LSP-DV150

150W Dual Voltage Power System for Brivo boards and locks

  • 12V/4A for Brivo controllers
  • 24V/4A for lock power
  • 24H x 20W x 4.5D enclosure accommodates up to three (3) ACS5000 series boards (Main, DB, IO) and (6) six locks

         Note: ACS5000 panels and expansion boards sold separately. Back-up batteries not included.

LSP-DV250

400W Dual Voltage Power System for Brivo boards and locks

  • 12V/20A | 150 Watts for Brivo controllers
  • 24V/10A | 250 Watts for lock power
  • 36H x 30H x 4.5D enclosure accommodates up to (10) ACS5000 series boards (Main, DB, IO) and (16) sixteen locks

Note: ACS5000 panels and expansion boards sold separately. Back-up batteries not included.

Now…Brivo Managed Power Advantage

With new dual voltage managed power systems, integrators gain the ability to offer a full suite of managed power services by monitoring the operation and health of the power system, battery set, locks, or any system connected device. Typical on-site service functions such as battery test, or onsite power cycling are able to be performed remotely freeing up technician time and more importantly, being able to respond instantly to system issues providing greater system uptime. The power management system is also predictive by identifying potential problems with batteries or connected devices so onsite maintenance can be performed before a problem occurs.

Intelligent power management provides instant notification of AC power loss, fire alarm input activation, cameras or locks drawing power beyond their rated current and information on batteries operating at a low, critical level. Scheduled or manual remote battery checks and the ability to proactively address potential system concerns prior to an incident give the end user greater peace of mind and enhanced system uptime—good news because this capability is available now!

Brivo Networked Power Management SKUs

LSP-DV150-NET

150W Dual Voltage Networked Power System for Brivo boards and locks

  • 12V/4A for Brivo controllers
  • 24V/4A for lock power
  • 24H x 20W x 4.5D enclosure accommodates up to three (3) ACS5000 series boards (Main, DB, IO) and (6) six locks

         Note: ACS5000 panels and expansion boards sold separately. Back-up batteries not included.

LSP-DV250-NET

400W Dual Voltage Networked Power System for Brivo boards and locks

  • 12V/20A | 150 Watts for Brivo controllers
  • 24V/10A | 250 Watts for lock power
  • 36H x 30H x 4.5D enclosure accommodates up to (10) ACS5000 series boards (Main, DB, IO) and (16) sixteen locks

Note: ACS5000 panels and expansion boards sold separately. Back-up batteries not included.

To learn more about Brivo Integrated Power Supply, check out our integrations page.

[class^="wpforms-"]
[class^="wpforms-"]